The laser cutter table size is 32″ x 18″. Please ensure your material fits within the allotted area prior to your appointment.
Laser Cutting Equipment
Tuesday, 13 June 2023
Universal Laser Systems
PLS 6.75
Size
Acceptable Materials
Prohibited Materials
About Equipment
Size
Acceptable Materials
Acceptable Materials to use for laser cutting:
Paper Based Materials
- Cardboard
- Chipboard
- Cresentboard
- Posterboard
- Cardstock
- Matboard
Wood Based Materials
- Basswood
- Plywood
- Balsawood
- Birchwood
- MDF
Glass/Acrylic Materials
- Acrylic
- Acetate
- Mylar
Glass (Etching Only)
Prohibited Materials
Use of Prohibited Materials will result in damage to the laser cutter and the release of toxic fumes. Use of any Prohibited Materials may result in revocation of laser cutter privileges and/or the requirement to make reparations for repair/replacement or both.
*If your material is not shown on either list, DO NOT use until consulting with Makerspace Staff.*
Prohibited Materials
- Lexane
- Polyurethane
- PVC
- Styrene
- Polycarbonate
- All Metals
- Non-Cast Acrylic
- Plexiglass
- Foamboard
About Equipment
The PLS6.75 is a free-standing platform with a material processing envelope of 32″ x 18″ x 8.5″ or 4,896 in³ (813 x 457 x 216 mm or 80,253 cm³). The single laser platform supports either one 10.6µm CO2 laser (10 to 75 watts) or one 9.3µm CO2 laser (30, 50, or 75 watts).
Universal Laser Systems
x660
Size
Acceptable Materials
Prohibited Materials
About Equipment
Size
The laser cutter table size is 32″ x 18″. Please ensure your material fits within the allotted area prior to your appointment.
Acceptable Materials
Acceptable Materials to use for laser cutting:
Paper Based Materials
- Cardboard
- Chipboard
- Cresentboard
- Posterboard
- Cardstock
- Matboard
Wood Based Materials
- Basswood
- Plywood
- Balsawood
- Birchwood
- MDF
Glass/Acrylic Materials
- Acrylic
- Acetate
- Mylar
Glass (Etching Only)
Prohibited Materials
Use of Prohibited Materials will result in damage to the laser cutter and the release of toxic fumes. Use of any Prohibited Materials may result in revocation of laser cutter privileges and/or the requirement to make reparations for repair/replacement or both.
*If your material is not shown on either list, DO NOT use until consulting with Makerspace Staff.*
Prohibited Materials
- Lexane
- Polyurethane
- PVC
- Styrene
- Polycarbonate
- All Metals
- Non-Cast Acrylic
- Plexiglass
- Foamboard
About Equipment
The ULS x660 is a free-standing platform with a material processing envelope of 32″ x 18″ x 8.5″ or 4,896 in³ (813 x 457 x 216 mm or 80,253 cm³). The single laser platform supports either one 10.6µm CO2 laser (10 to 75 watts) or one 9.3µm CO2 laser (30, 50, or 75 watts).
- Published in Laser Cutting
No Comments